Fix Windows 10 errors codes manually
Released in 2015, millions of people had downloaded, installed and upgraded their operating systems to Windows 10. Microsoft successfully made Windows 10 a commercial operating system. Today more than 35% of people use Microsoft’s Windows 10.

Windows 10 is a continually evolving platform!
No perfect codes are written in Windows 10 and therefore it isn’t without faults. The plenty of issues in Windows 10 doesn’t allow it as an error-free operating system.
“Hence, fixing the errors in Windows 10 is important to evolve as a user-friendly operating system.”
That’s why people in Microsoft offices are working day and night to solve faults and system error codes. However, there exists no proper guide to fix error codes. But, if the installation issues of Windows 10 are solved, then the errors will fix automatically.
The three main issues of Windows 10 causing system error codes are the problems in installation, upgrade and updates. Thus, the best way to solve the error codes and installation problem is by reinstalling Windows 10.
Reinstall Windows 10
Reinstalling Windows 10 gives a new life cycle to a system which might be free from error codes. However, before you install Windows 10, make sure you have minimum 4GB space available in your system. Below is the guide to download and install windows 10;
- Download Windows 10 from the Microsoft website.
- Accept all the applicable notices and license terms.
- Select create installation media for another PC and click next.
- Click save and wait till download finishes and click next.
- Select ISO file and click next.
- Click save to download ISO file.
- Click finish and open the downloaded file.
- Open Setup and click Download and install updates.
- Click next, accept all license agreements and install Windows 10.
Anyone can upgrade their previous Windows version to Windows 10’s updated version.
We hope that the reinstallation of Windows 10 will be successful in your system.
Most of the times while upgrading previous versions of Windows, many users see cryptic errors. The setup of Windows 10 does not give detailed information of error codes, but they affect the system’s working. Moreover, there exist many reasons where we might get error messages while installing Windows 10.
Reduce more risks by General Fixes!
Detailed technical information is necessary to minimize Windows 10 system error codes. Also, there are few steps which can help a user to fix common errors manually. In this article, we have a list of Windows 10 error codes which you can get yourself by pressing ‘CTRL + F.’
Before we jump over to the list of errors, try few general fixes after installation;
- Remove external hardware devices
- Run the Windows update troubleshooter from Microsoft’s website.
- Uninstall all the antivirus software which are not compatible with Windows 10 and download free malware removal tool.
- Uninstall all the non-essential software and free your disk space.
- Disable Ads in Windows 10.
- Disable Auto apps for Windows 10.
If these general fixes don't work then the best way is to correct all the errors individually. For this purpose, we have gathered all Windows 10 system error codesinto different categories in addition to the methods used to fix them.
Error Codes with no hex-format
Error: We couldn’t complete the updates. Undoing changes. Please don’t turn off your computer.
|
These two generic errors fail your Windows updates. To find the error code, view your update history. Look for uninstalled updates.
in Windows 8.1, swipe in using mouse pointer from the right edge of the display screen. |
Error: Failure configuring Windows Updates. Reverting changes.
|
Select Settings > Change PC settings > Update and recovery > View your update history.
In Windows 7, select the Start button. Now select Windows Update from search results > View update history. This solves both errors.
|
Error: We couldn’t t update System Reserved Partition.
|
This error implies that SRP is full. To resolve this error-free SRP space follow these steps;
- Go to the Run Window and type diskmgmt.msc & press enter.
- Right click on the disk which contains SRP.
- Select properties and
- Choose Windows 10 GPT or MBR
- Now free your SRP space.
|
Error: The update isn’t applicable to your system. |
This error says that your PC doesn't have the required updates. Thus, check that your system has all the required updates. |
Error Codes with hex-format
Error 0xC1900208 – 0x4000C
|
It indicates an incompatible installation of the app on your PC. Check such apps and uninstall them from Programs and features.
|
Error 0xC1900107
|
A cleanup operation of a previous installation attempt is pending. Also, a restart is required to upgrade Windows. After, restart clean up the Disk Space and rerun setup.
|
Error 0x80073712
|
A file for Windows Update is damaged or missing. Repair your system files:
- Start > type command prompt in the search box.
- Select Command Prompt from search results.
- Type DISM.exe /Online /Cleanup-image /Restorehealth and press the Enter key in the Window that appears.
|
Error 0xC1900200 – 0x20008
Error 0xC1900202 – 0x20008
|
This suggests that your Windows system doesn’t have minimum requirements to download or install Windows 10.
|
Error 0x800F0923
|
This indicates incompatible behavior of any software or driver with the upgrade to Windows 10.
|
Error 0x80200056 |
The upgrade process was interrupted because you accidentally restarted your system. Thus, upgrade your PC and make sure it is plugged in and stays turned on.
|
Error 0x800F0922
|
This error shows no connection of your PC to the Windows Update servers. It is better to use a good internet connection
The error message informs about the less free space in the System Reserved partition. Try increasing the size of System Reserved Partition by using third-party software.
|
Error 0x80070070 – 0x50011
Error 0x80070070 – 0x50012
Error 0x80070070 – 0x60000
|
Your system might not have enough space to install the upgrade. Thus, free some space on drive try upgrading your system again.
|
Error 0x0000005C
|
Phase 0 initialization of the Hardware Abstraction Layer (HAL) failed. This indicates a hardware issue. The only way to fix the issue is to meet minimal hardware requirements for Windows 10. Additionally, the other method is to update the computer’s BIOS.
|
Error 0x80070003 - 0x20007
|
Internet connection fails while Windows 10 installation.
|
Error 0x8007002C - 0x4000D
|
This error message implies corrupt system files in operating systems. To fix this error, execute Chkdsk /f c: in the command prompt.
|
Error 0x8007002C - 0x4001C
|
This error may occur because of hardware conflicts and antivirus software conflicts. Meeting minimal hardware requirements of Windows 10 is a must. However, by using free malware removal tool, virus and malware attack can be easily prevented.
|
Error 0x80070103
|
This issue occurs, if Microsoft updates try to install a driver the second time.
|
Error 0x8007025D - 0x2000C
|
This error message occurs if the specified buffer contains ill-formed data.
|
Error 0x80070652
|
This error message occurs when the installation of some other program is in progress. To fix this error, wait for the installation to get complete.
|
Error 0x80072EE2
|
The operation timed out. This may occur if the internet connection is not working properly. Another option is to check the firewall settings. The following website addresses are allowed by the firewall: http://*.update.microsoft.com https://*.update.microsoft.com http://download.windowsupdate.com
|
Error 0x80200056
|
This error message occurs if Windows 10 is logged off before an upgrade is complete. |
Error 0x80240017
|
This error occurs due to the unavailability of the upgrade to your active Windows running on the system.
|
Error 0x80240020
|
It indicates the invalid session ID of the running Windows 10 setup.
|
Error 0x80240031
|
Occurs when the Windows installation files are in the wrong format. Error 0x80240020 and 0x80240031 is avoided by downloading Windows 10 from a valid source such as Microsoft’s website.
|
Error 0x80246007
|
This error occurs when Windows 10 does not download.
|
Error 0x80246017
|
It indicates local user account did not have administrator permission and thus download failed. To fix the error, log on to another account with administrator permission and install Windows 10 again.
|
Error 0xC0000001
|
This issue may occur due to file system errors and corrupt file systems. Temporarily, disable file system virtualization applications while upgrading to Windows 10.
|
Error 0xC0000428
|
Windows can’t verify the digital signature for INSTALL.wim in the Windows 10 image. A hardware or software change might have installed a damaged file from an unknown source.
|
Error 0xC1900106
|
Windows could not install the update. The installation process is failed. To fix the error before upgrade do the following things;
- Disable Antivirus program and user free malware removal tool.
- Make sure that the latest drivers are installed.
|
Error 0xC1900101 - 0x30018
|
Windows upgrade failed after the first restart. To fix this;
- Go to the computer manufacturer's website and contact their support line.
- Uninstall devices which you don’t use regularly.
- To do this, go to Program and Features, search them and then uninstall.
|
Error 0xC1900101 - 0x2000B
|
In case of this error, disconnect all the devices which are not in use during the upgrade. |
Error 0xC1900101 - 0x20017 |
This issue occurs when a driver bug check occurs at the time of Windows 10 upgrade.
Make sure that all the drivers are updated. |
Solving error issue is not a big task. Yet these cryptic system error codes keep coming unless installation and update problems of Windows 10 is not solved.
Get peace of mind! Get rid of malicious programs instantly
Free Checkup & fix for your PC! Get rid of malicious programs instantly!
Installation Problems of Windows 10
Windows 10 is secure to buy and download, but installation needs few mandatory specifications in your hardware;
- Processor: 1 gigahertz (GHz) or above
- RAM: 1 GB for 32-bit and 2 GB for 64-bit
- Hard disk space: 16 GB for 32-bit OS and 20 GB for 64-bit OS
- Graphics card: DirectX 9 or later with WDDM 1.0 driver
- Display: HD (1024 x 768) and 800 x 600
During installation of Windows 10, your system halts because hardware requirements do not fulfill. Moreover, it leads to an installation error which can be fixed by only upgrading your hardware specifications.
Upgrade Problems in Windows 10
When your active Window upgrades and starts running, an error message “Something happened” displays on the screen. This error message is known as “Something happened error.”
If the upgrade of active Window fails to Windows 10 then follow these steps to rectify the problem.
- Remove Secondary Storage devices: While upgrading your active windows, remove USB hard disk, USB flash disk and other storage devices installed on the system. The removal of the storage device is necessary because these devices can confuse the setup program while Windows upgrade.
- Stop unnecessary startup programs: Open task manager or system configuration manager to stop all the unnecessary applications. To prevent the misconfiguration of system programs, startup programs are closed for safe booting.
- Unplug unnecessary peripherals: Unplug all peripherals like printers, scanners and TV screens from the computer which is upgrading. Just keep keyboards and mouse plugged into the system.
- RAM Troubleshoot: Fault in RAM prevents the upgrade of your active windows and displays a message “DRIVER_POWER_STATE_FAILURE.” Be aware that 1GB for 32-bit and 2GB for 64-bit is the minimum requirement for Windows 10.
- Disable Security Software: For Windows upgrade to Windows 10, stop all the antiviruses and antimalware for security monitoring.
It is better to use a tool which acts as antivirus + antimalware + anti-ransomware. Thus, we recommend using a free malware removal tool to protect your new Windows 10 from the attacks of malicious software.
Updates Problem in Windows 10
It is ironic to know that Microsoft made few updates in Windows 10 installation mandatory for the users. Previously, users have mainly faced issues related to security and error fixing in the software. However, now errors like BSOD has become a common error code which slows down the system. Thus, Windows 10 is all geared to fix previous errors while updating.
In case, after the installation and updates Windows 10 acts strangely and won’t start then reboot your new Microsoft OS.
Windows 10 tries to handle driver updates but sometimes leave essential updates behind. So, when a hardware issue strikes, it’s worth to repair your Windows 10.
Follow below 5 methods to repair your Windows;
- Use Windows startup repair: Navigate to Windows 10 Advanced Startup Options and click on Startup Repair to diagnose your PC.
- Use Windows restore: In Windows 10 Advanced Startup Options, select System Restore. The computer reboots!
- Enter your username, password and select a restore point.
- Perform a Disk Scan: Sometimes Windows 10 problem occur from a corrupt file. Thus, to boot into safe mode first perform a file scan to check for problems.
- 1. Type cmd in the search box, select command prompt and click ‘Run as
Administrator'.
- 2. Type sfc/scannow at the command prompt and hit enter.
- Reset Windows 10: Windows 10 provides a built-in feature that takes your computer back to default mode and resets Windows 10.
If everything goes well then Windows 10 will automatically fix the problems and reboot. Additionally, it removes the memory error from your Windows 10 system.
Always keep your system in safe mode and let’s know anything more about Windows 10 error codes in the comment section.
Are you worried about your PC health?
Check your PC Health for Free!